16ga.com ~ Search

I had a number of 1 oz. loads for the CF, my favorites were with SR7625 and the WAA16 (CB0100-16) wads.

The other loads I liked used Winchester Super Field powder. Those are in the old Winchester m ...

BWW,

Yup, I have just gone to CT where my wife had some surgery and I took care of her. She is an RN and normally takes care of me and the dogs!! Can't wait for her to get back to ND, but it will b ...

I shot a couple of boxes of 12 ga. Fiocchi Shooting Dynamics at a shoot where the ammo was supplied to the shooters. I had 3 or 4 rounds that didn't get extracted from the chamber. I shoot a Benelli S ...

Double Vision, this is something I do and maybe it will work for you also.

As of August 31 each year the shotgun I use for almost all of my sporting clays shooting, goes into the safe and doesn't ...

jim18611865,

Contact Precision Reloading. They have data for all the wads they sell. All you have to do is ask.

Orders@precisionreloading.com

Gualandi (SG16 and SG16S) wads will probably produce more pressure than the Claybuster wad because they will seal better and are larger in diameter.

Not sure what the issue is but a wad change won' ...

Not much of a traditionalist, I always use guns that I shoot the best. For me that is either my 16 ga. 1100 or 870.

One item I forgot to mention. This load will cycle my 1100 as long as I run it wet.

My favorite:

2 3/4" Cheddite hull
Winchester 209
18.0 Grains American Select
DR-16 wad
3/4 oz. lead shot

1,340 FPS - 9,500 PSI
SD - 7 FPS

tested by Tom Armbrust.

robp,

Blanks to Supersonics were the loads I developed back in the late 1990's to early 2,000's, when Precision was in CT.

The new loads were developed more recently, by completely different fol ...

putz436,

No ammo manufacturer makes a truly buffered steel load. Buffering steel just doesn't do much except raise the chamber pressure. Alliant doesn't have data for it. Lyman doesn't have data fo ...

I had it happen a couple of times with the 20 gauge, Remington wad in a Federal hull using SR7625. It took me 2 missed opportunities before I realized what was going on. The first time I thought that ...

Way back when, Tom and I used to have a reference load that we shot every time we setup. Monthly we would compare the numbers and we were always within 15 FPS and 400 PSI of each other.

I wouldn't ...

I really don't know. I have used them 3 times now over a period of probably 4 years and each time I have had the results back in a week from the time they probably received the loads.

I send stuff ...

So let's get this correct. Their loads are not "too hot". Their loads are going to recoil because they built loads that have some velocity to them. They actually have produced good loads wit ...