16ga.com Forum Index
Author Message
<  16ga. Guns Wanted or For Sale  ~  Francotte 16ga 14E--SOLD
lbrown
PostPosted: Mon Mar 27, 2017 4:10 pm  Reply with quote



Joined: 06 Jan 2017
Posts: 83

$2975, shipped to your FFL. A light 16 like this one . . . perfect Mother's Day present for a shooting wife!

From 1935. For details, go to gunsinternational and search 100674680. I've owned the gun for a few months, but it's still on Champlin's list. And George Caswell does a nice job of describing it along with good pictures. I also have all the "provenance" material from Griffin & Howe. Only addition I'd make is a crack or deep scratch in one corner of the forend, where it meets the receiver. Not sure which it is, because nothing shows on the inside although it could have been repaired, and it's very stable. I have a photo of that. If you're interested, email me for the photo: ljoelbrown@gmail.com.

Factory 2 3/4", 26", 5 3/4 pounds. Chokes a little more than cyl and mod. $3200.


Last edited by lbrown on Fri Jun 02, 2017 5:31 am; edited 4 times in total
Back to top
View user's profile Send private message
skeettx
PostPosted: Mon Mar 27, 2017 4:49 pm  Reply with quote
Member
Member


Joined: 15 Apr 2007
Posts: 9455
Location: Amarillo, Texas

Maybe this will assist

http://www.gunsinternational.com/guns-for-sale-online/detail.cfm?gun_id=100674680&CFID=2366921&CFTOKEN=2b681e338a429a4f-B5AA65CA-94C2-0B60-1A5B0E4EA159BD20

$3900.00
Back to top
View user's profile Send private message Send e-mail
Little Creek
PostPosted: Mon Mar 27, 2017 5:28 pm  Reply with quote
Member
Member


Joined: 21 Feb 2005
Posts: 367
Location: Anchorage, AK

Seems like this would make a killer grouse/quail gun. However, for me, 2-3/4" of drop is too much. Fine gun!
Back to top
View user's profile Send private message
lbrown
PostPosted: Tue Mar 28, 2017 4:58 am  Reply with quote



Joined: 06 Jan 2017
Posts: 83

Little Creek, that's the only measurement on which George and I came out with slightly different numbers. I was worried about that too. I actually got 2 5/8" when I measured the drop. And given that the LOP is just a little shorter than I usually shoot, it doesn't come up low for me. I see all of the rib, even when I make a conscious effort to cheek it very hard. If you needed a longer LOP, like 14 1/2" or more, then I think it might be a case of too much drop.
Back to top
View user's profile Send private message
Little Creek
PostPosted: Tue Mar 28, 2017 8:58 am  Reply with quote
Member
Member


Joined: 21 Feb 2005
Posts: 367
Location: Anchorage, AK

Champlin sure has had some nice Francottes. I own two and like both.
Back to top
View user's profile Send private message
BigCreekMI
PostPosted: Tue Mar 28, 2017 5:29 pm  Reply with quote
Member
Member


Joined: 27 Dec 2005
Posts: 582
Location: Great Lakes

No more "old" old school SxSs for me, but this is a tempting sweetheart. Mr. C does have some nice inventory.

_________________
A Springer Spaniel, a 6# double and a fair day to hunt.
Back to top
View user's profile Send private message
lbrown
PostPosted: Sat Apr 22, 2017 3:48 pm  Reply with quote



Joined: 06 Jan 2017
Posts: 83

Bumping to the top, with reduced price.
Back to top
View user's profile Send private message
esetter
PostPosted: Sun Apr 23, 2017 4:05 am  Reply with quote



Joined: 23 Dec 2009
Posts: 36
Location: Okeana, OH

Just a thought for those that need less drop. Champlin's gunsmith can bend the stock higher for you. He did a gun for me and did a nice job. If my memory serves me correct he charged $250. Should be able to bend up at least 1/4 with no problem.

_________________
Hunt Grouse with Setters and SXS's. Don't drink light beer!
Back to top
View user's profile Send private message
Display posts from previous:   
All times are GMT - 7 Hours

View next topic
View previous topic
Page 1 of 1
16ga.com Forum Index  ~  16ga. Guns Wanted or For Sale

Post new topic   Reply to topic


 
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




Powered by phpBB and NoseBleed v1.09