Author |
Message |
< 16ga. Ammunition & Reloading ~ 7/8 oz. Load using 700-X - Thanks |
|
Posted:
Sun Feb 28, 2021 6:16 pm
|
|
|
Joined: 04 Mar 2019
Posts: 1844
Location: Central ND
|
|
I want to thank whoever suggested the 7/8 oz. load using 700-X.
I used it today in a 5 Stand League and the load cycled my 1100 very well and while not super cold, the temp was 32 degrees or so. The load has made it easy to keep 1 powder on hand for all my target loads.
I am going to have it tested in both Federal and Cheddite/Winchester hulls. I will post the results, though it will probably be a couple weeks before I send the loads to Precision. |
_________________ Mark...You are entitled to your own opinion. You aren't entitled to your own facts. |
|
|
|
|
|
|
Posted:
Mon Mar 01, 2021 5:08 am
|
|
|
Member
Joined: 27 Jun 2012
Posts: 1114
|
|
I think it was Skeettx who offered up the data for that load. What a helpful wealth of information that gentleman is. |
_________________ An elderly gentleman, his faithful dogs, and a 16 ga SXS. All is right with the world. |
|
|
|
|
|
|
Posted:
Mon Mar 01, 2021 7:50 am
|
|
|
Member
Joined: 09 Jan 2013
Posts: 2170
Location: Florida
|
|
|
|
|
|
|
Posted:
Mon Mar 01, 2021 8:32 am
|
|
|
Joined: 24 Jun 2013
Posts: 2067
Location: canandaigua - western n.y. (formerly deerhunter)
|
|
FN , nice find in the archives !! Mark , I !think you found the gild std for those loads - so love 700X !!Should con't to work your 1100 . My load is just a little less , 14grns powder and 360 grns of shot . Just an oddball I came up with while checking to see what the powder side would drop shot on my bars . As skeet is my main game , I can go as low as stays consistent and make the 11-48 cycle . The 7/8 load should be the Cat's meow ! |
_________________ Molly sez AArrrooooooah ! |
|
|
|
|
|
|
Posted:
Mon Mar 01, 2021 2:23 pm
|
|
|
Joined: 04 Mar 2019
Posts: 1844
Location: Central ND
|
|
I am using 16.0 Grains - 700-X and the DR16 in 2 3/4" hulls. Not real happy with the EV's. I need to try Federal 209A primers.
Most of my shotguns pierce Cheddite primers, so for me that isn't an option.
I am going to try 17.0 grains also, but that maybe too hot.....I'd like to see 1250 FPS or a bit higher. These chrono'd 1230 FPS...not a deal breaker though.....just trying to keep the 12 ga. & 16 ga. velocities as close as I can get them. |
_________________ Mark...You are entitled to your own opinion. You aren't entitled to your own facts. |
|
|
|
|
|
|
Posted:
Mon Mar 01, 2021 8:44 pm
|
|
|
Joined: 03 Sep 2014
Posts: 398
Location: Rochester, MN
|
|
My go to 16 gauge target load is:
2 3/4" Cheddite hull
Cheddite 209 primer
14 grains 700x powder
Clay Buster AA clone wad
7/8 oz of #7 1/2 or #8 shot
3 pinto beans to achieve a good crimp
This load chronographs at 1233 fps.
I developed it based on a published 1 oz load. I cycles my Auto 5 and performs well for both skeet and sporting clays. |
_________________ John Singer |
|
|
|
|
|
|