16ga.com Forum Index
Author Message
<  16ga. Ammunition & Reloading  ~  What is your favorite recipe for 1 ounce black Remingtons
Hal M. Hare
PostPosted: Thu Oct 18, 2007 2:10 pm  Reply with quote
Member
Member


Joined: 25 Nov 2005
Posts: 790
Location: Central Florida

What is your favorite recipe for 1 ounce black Remingtons?
I have been reloading for clays and found I like these the best.
Have been getting good performance and multiple reloads.

_________________
Hal M. Hare
hal.hare@sbcglobal.net
Back to top
View user's profile Send private message Send e-mail
Wolfchief
PostPosted: Thu Oct 18, 2007 4:20 pm  Reply with quote



Joined: 15 Oct 2004
Posts: 787
Location: Indiana

I use Green Dot, WW 209 primers and an R-16 1 oz. wad with #9 mag shot for skeet.

_________________
One Man with Courage is a Majority
---Andrew Jackson
Back to top
View user's profile Send private message
TJC
PostPosted: Thu Oct 18, 2007 4:22 pm  Reply with quote
Member
Member


Joined: 20 Mar 2005
Posts: 1522
Location: NH

Get an answer from pudlepointer, he gets all my empties and reloads them with a reduced load that shoots very nice.

_________________
A bad day of hunting is better than a good day of work.
Back to top
View user's profile Send private message
pudelpointer
PostPosted: Fri Oct 19, 2007 6:50 am  Reply with quote
Member
Member


Joined: 14 Jan 2006
Posts: 1007
Location: Lancaster county, Pa

18.5 gr Solo 1250 Rem 209 primer R-16 wad 7/8 oz 8.5 west coast mag. No filler required. I want to test this load with a win 209 primer. I think its 7800 psi at 1185 nice Target load. I also load 16.5 gr of Unique with Win 209 and 7/8 oz. but you need a 32 gauge card wad in the shot cup. It is 8250 psi and 1200 fps. I think Hogdon publishes a 1 oz load with Universal that I like for Modern Guns.
Back to top
View user's profile Send private message Send e-mail
sothere
PostPosted: Fri Oct 19, 2007 7:16 am  Reply with quote



Joined: 02 Jun 2007
Posts: 107
Location: N.W. Iowa

18 gr.IMR 7625,WAA wad,Win 209 primer.
This was my skeet load and I used the same powder bushing for my 20 gauge skeet loads.
The 16 was a bit short on the chart but the straights on the range did'nt show it. Will include a pic of one later.
Back to top
View user's profile Send private message
TJC
PostPosted: Fri Oct 19, 2007 9:01 am  Reply with quote
Member
Member


Joined: 20 Mar 2005
Posts: 1522
Location: NH

pudelpointer wrote:
18.5 gr Solo 1250 Rem 209 primer R-16 wad 7/8 oz 8.5 west coast mag. No filler required. I want to test this load with a win 209 primer. I think its 7800 psi at 1185 nice Target load. I also load 16.5 gr of Unique with Win 209 and 7/8 oz. but you need a 32 gauge card wad in the shot cup. It is 8250 psi and 1200 fps. I think Hogdon publishes a 1 oz load with Universal that I like for Modern Guns.



See, told ya he would have one. Wink

_________________
A bad day of hunting is better than a good day of work.
Back to top
View user's profile Send private message
Display posts from previous:   
All times are GMT - 7 Hours

View next topic
View previous topic
Page 1 of 1
16ga.com Forum Index  ~  16ga. Ammunition & Reloading

Post new topic   Reply to topic


 
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




Powered by phpBB and NoseBleed v1.09