Author |
Message |
< 16ga. Ammunition & Reloading ~ RGL's feeding & extracting problems, in a Pump Gun. |
|
Posted:
Thu Apr 09, 2009 12:48 pm
|
|
|
|
TB,
I was only commenting on your statement about the the Winchester loads from Italy being above pressure. Period. |
|
|
|
|
|
|
|
Posted:
Thu Apr 09, 2009 9:32 pm
|
|
|
Member
Joined: 16 Feb 2006
Posts: 711
Location: Flagstaff, AZ
|
|
TB,
Go back and read my first two posts. I said that the gun has fired two other brands of factory hulls and reloads with three different brands of hulls without a problem. These loads have been everything from 7/8oz reloads to 1295fps 1 1/8oz factory loads. I also stated this gun has fired 2000 rounds since the problem with the Super X ammo with no problems, nada, zippo, zilch. At the time this episode happened I was shooting this gun a bunch with factory Feds and RGL's making empty hulls for reloading. If the chamber was as dirty as you seem to think, I should have had problems with the Federal and Remington ammo also but they worked great. I also said the steel heads were sticking in the chamber not the entire hull.
You have tunnel vision, no, actually it's more like you are looking down a straw. You have your mind made up my gun's chamber is dirty and there is no other possible explanation for the problem I had. |
_________________ Dennis
Current 16ga. Stable
Browning Citori Gr I
Browning Belgium Sweet 16
A.H. Fox Sterlingworth
Remington 11-48
Remington 31
Remington 870
Geco/J.P. Sauer BLNE
Winchester Mod 12 |
|
|
|
|
|
|
Posted:
Fri Apr 10, 2009 9:06 am
|
|
|
|
I'm not sure which of us is looking through a straw in this situation but personally I no longer give a rats ass if your gun functions or not. I was just trying to offer a simple remedy. |
|
|
|
|
|
|
|
Posted:
Fri Apr 10, 2009 11:11 am
|
|
|
Member
Joined: 16 Feb 2006
Posts: 711
Location: Flagstaff, AZ
|
|
My gun function just fine as long as I don't put your favorite shells in it. |
_________________ Dennis
Current 16ga. Stable
Browning Citori Gr I
Browning Belgium Sweet 16
A.H. Fox Sterlingworth
Remington 11-48
Remington 31
Remington 870
Geco/J.P. Sauer BLNE
Winchester Mod 12 |
|
|
|
|
|
|
Posted:
Fri Apr 10, 2009 11:45 am
|
|
|
|
Square Load wrote: |
My gun function just fine as long as I don't put your favorite shells in it.
|
There you go making inaccurate assumptions. Are you by any chance related to Joe Biden?
For the record my favorite load is a Federal paper trimmed to 2 9/16th inches loaded with an ounce of shot and finished off with a roll crimp. However I do reload Federal plastic, Winchester or Cheddite and Remington GL hulls as well and have never had a hull fail to extract.[/u] |
|
|
|
|
|
|
|
Posted:
Fri Apr 10, 2009 11:58 am
|
|
|
Member
Joined: 16 Feb 2006
Posts: 711
Location: Flagstaff, AZ
|
|
I believe you were the first one to make an "inaccurate assumption". |
_________________ Dennis
Current 16ga. Stable
Browning Citori Gr I
Browning Belgium Sweet 16
A.H. Fox Sterlingworth
Remington 11-48
Remington 31
Remington 870
Geco/J.P. Sauer BLNE
Winchester Mod 12 |
|
|
|
|
|
|