16ga.com Forum Index
Author Message
<  16ga. Ammunition & Reloading  ~  Bench mounted roll crimper on Ebay
UncleDanFan
PostPosted: Wed Jun 19, 2019 6:50 am  Reply with quote
Member
Member


Joined: 06 Apr 2007
Posts: 3370
Location: The Great Northwet

I use a vintage roll crimper with a plunger at the end. Got it on ebay. It works fantastic. 4 or 5 turns of the handle and a perfect crimp. Takes just a few seconds.

_________________
Gun art: www.marklarsongunart.com
Gallery art: www.marklarsonart.com

The man's prayer from the Red Green Show: "I'm a man, but I can change, if I have to. I guess."
Back to top
View user's profile Send private message
PatrickB
PostPosted: Wed Jun 19, 2019 7:34 pm  Reply with quote
Member
Member


Joined: 16 Dec 2007
Posts: 592
Location: Minnesota

Just curious...I fear the shot pouring out when turning the hull sideways as it's placed in a setup like this...does the overshot card really prevent such a disaster before you start the roll crimp?

I have a pile of once fired paper hulls that I never could get a good crimp on the PW...maybe roll crimping is a better option???
Back to top
View user's profile Send private message
16'er
PostPosted: Thu Jun 20, 2019 3:32 am  Reply with quote
Member
Member


Joined: 08 Oct 2006
Posts: 1393
Location: Tappahannock, Virginia

PatrickB wrote:
Just curious...I fear the shot pouring out when turning the hull sideways as it's placed in a setup like this...does the overshot card really prevent such a disaster before you start the roll crimp?

I have a pile of once fired paper hulls that I never could get a good crimp on the PW...maybe roll crimping is a better option???


Yes, overshot card does keep everything in place.
Back to top
View user's profile Send private message
UncleDanFan
PostPosted: Thu Jun 20, 2019 5:16 am  Reply with quote
Member
Member


Joined: 06 Apr 2007
Posts: 3370
Location: The Great Northwet

I mount mine vertically to alleviate that concern.

_________________
Gun art: www.marklarsongunart.com
Gallery art: www.marklarsonart.com

The man's prayer from the Red Green Show: "I'm a man, but I can change, if I have to. I guess."
Back to top
View user's profile Send private message
JoseBob
PostPosted: Sat Jun 22, 2019 7:22 pm  Reply with quote



Joined: 05 Nov 2010
Posts: 26
Location: Southwest Arkansas

UncleDanFan wrote:
I mount mine vertically to alleviate that concern.


That is a great idea. Never thought of that. Should work better on a bench with a lip (facing board) on the front of it as well.

_________________
Draw a fine bead on em Son! Bobby
Back to top
View user's profile Send private message Send e-mail
16'er
PostPosted: Fri Nov 29, 2019 2:20 am  Reply with quote
Member
Member


Joined: 08 Oct 2006
Posts: 1393
Location: Tappahannock, Virginia

16'er wrote:
16'er wrote:
I purchased one of these a few months back.

I'll just hit the important details, to save time...

1) Shipping is extended duration, as you would expect. Mine was 5-6 wks.

2) I was unable to produce a roll crimp on either federal or winchester hulls. the hull would buckle on the side prior to a crimp starting. These were once fired hulls, trimmed to 65mm.

(I have the precision roll crimper on my drill press and I can produce nice crimps, btw..)

3) I have not tried to crimp a paper BPI sourced hull yet. I have not settled on a recipe, or had time as of late to do so. I was going to wait until I had tried one of the paper hulls and took some actual pictures prior to a review on this site.

4) At this time I can not recommend this product. YMMV.


With the recent move, I’ve gone through about everything I own... I found this roll crimper in a box of reloading sundries. Looks like it very well be a 12ga model, hence my previous frustration with trying to produce 16ga crimps. If I ever get around to loading 12ga, I’ll give it a try again. I’m quite certain I ordered the 16ga model, guess something was lost in translation?


Loaded some 2.5” 12ga and finished them with the Russian roll crimper. Fairly easy to use, and decent looking roll crimps were achieved. Finally will get to put the Higham English boxlock to use this weekend. Loaded 1oz loads, and the gun weighs 6lbs 4oz, so pretty familiar territory for a 16ga hack.
Back to top
View user's profile Send private message
Charles Hammack
PostPosted: Fri Nov 29, 2019 11:20 am  Reply with quote
Member
Member


Joined: 02 Feb 2007
Posts: 1729
Location: Central Missouri

Been using both 16 & 12 GA roll crimper from Russia , the casting is miss aligned on the 16 GA but the 12 GA is spot on .

Both make a beautiful roll crimp on everything I have tried them on .

Roll crimping some of the 2.5" 1/2 oz loads for some of the short chambered guns.

I will clue those that have not figured this out yet 😂.

The guns one wants for weight , balance and point ability will be the guns pre 2.75" they made upland guns that were correct in the 20's & 30's.

More nice guns for me , keep buying new guns , I will take the Ole clunkers that no one else wants.

Regards Nick
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
All times are GMT - 7 Hours

View next topic
View previous topic
Page 2 of 2
Goto page Previous  1, 2
16ga.com Forum Index  ~  16ga. Ammunition & Reloading

Post new topic   Reply to topic


 
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




Powered by phpBB and NoseBleed v1.09