Author |
Message |
< 16ga. Ammunition & Reloading ~ scored 3 boxes of compression formed |
|
Posted:
Sun Mar 25, 2018 3:48 pm
|
|
|
Joined: 09 Mar 2006
Posts: 39
Location: maryland
|
|
So, I was at a gun show yesterday and found 3 boxes of Winchester Upland compression formed 16 gauge. 1 1/8 oz 9's.
Should I shoot them, collect them or trade them off is the question.
In my world 1 1/8 oz seems sort of extreme for the 16 - I usually shoot an oz and frankly my 12 gauge loads are usually 7/8 oz.
My 16's are a Darne. some Pieper, Bayard Hammer guns and an old Stevens 520 pump so nothing that really wants high pressure or recoil.
I know the hulls are special but I have plenty of Herters and Remingtons... |
|
|
|
|
|
![](templates/NoseBleed/images/spacer.gif) |
|
Posted:
Sun Mar 25, 2018 5:18 pm
|
|
|
Joined: 16 Jul 2015
Posts: 2126
Location: Hudson,Wy
|
|
I wish I had found them. My guns don't object to them at all. I am reloading a bunch of those hulls tonight. |
_________________ Only catch snowflakes on your tongue AFTER the birds fly south for the winter... |
|
|
|
|
![](templates/NoseBleed/images/spacer.gif) |
|
Posted:
Sun Mar 25, 2018 5:22 pm
|
|
|
Joined: 26 Apr 2010
Posts: 3177
Location: NCWa
|
|
I was unaware that Winchester-Western made the Upland shells with 1 1/8 oz. the Uplands that I've seen were 1 oz. so they may be rare. |
|
|
|
|
|
![](templates/NoseBleed/images/spacer.gif) |
|
Posted:
Sun Mar 25, 2018 6:28 pm
|
|
|
Member
![Member Member](images/theavatar.jpg)
Joined: 31 Aug 2005
Posts: 1257
Location: Nebraska
|
|
Collecting is fine, can always trade them off later. All of my unfired CF are 1 1/8oz, most 2 3/4DE but many 3 1/4DE Super-X. They're not too bad to shoot out of a M12, your pump would probably be fine to make them into empties if you want to create some specific loads you'll always be able to identify. |
_________________ Bore, n. Shotgun enthusiast's synonym for "gauge" ; everybody else's synonym for "shotgun enthusiast." - Ed Zern |
|
|
|
|
![](templates/NoseBleed/images/spacer.gif) |
|
Posted:
Sun Mar 25, 2018 6:43 pm
|
|
|
Joined: 12 Feb 2018
Posts: 258
Location: West-central Missouri
|
|
Lawerence, your post reminded me where I had some old Win shells stashed (which I had totally forgotten about). Pulled out 5 boxes of old Super X and Uplands. Also a case of AA 28 target. Best part was to find 3 mint condition reloading manuals from the 1980's. Win, Herc, & Du Pont. |
_________________ An ounce of fives, the smell of nitro in paper hulls, wet gundog, and Hoppe's #9... |
|
|
|
|
![](templates/NoseBleed/images/spacer.gif) |
|
Posted:
Tue Mar 27, 2018 7:25 pm
|
|
|
Joined: 13 Mar 2016
Posts: 31
Location: Twin Cities, MN.
|
|
The CF hulls have been out of the market for so long there are not many published loads anymore. Does anybody have any load recipes to use for skeet using any Alliant product such as Unique? I have a few boxes I need to shoot and then try to reload. |
|
|
|
|
|
![](templates/NoseBleed/images/spacer.gif) |
|
Posted:
Tue Mar 27, 2018 7:43 pm
|
|
|
Member
![Member Member](images/theavatar.jpg)
Joined: 15 Apr 2007
Posts: 9463
Location: Amarillo, Texas
|
|
16 ga CF hulls
1 oz shot
Win 209 primer
18.0 Unique Rem R16 Wad 1165 fps 9100 psi
18.5 Unique Rem R16 Wad 1220 fp s 9600 psi
The Handbook of Shotshell Loading by Couger |
_________________
,
USAF RET 1971-95 |
|
|
|
|
![](templates/NoseBleed/images/spacer.gif) |
|
Posted:
Tue Mar 27, 2018 7:47 pm
|
|
|
Joined: 12 Feb 2018
Posts: 258
Location: West-central Missouri
|
|
Carnelian - one of the manuals I found last weekend:
Hercules 75th Anniversary Reloaders' Guide Revised 4/88 Page 31
"16-gauge 2 3/4 Inch Winchester-Western Plastic Upland Shells
2 3/4 Dram lead 1 1/8oz. Vel. 1185 fps WIN-209 SP-16 Unique 18.5gr 10,100psi"
More recently Lyman 5th Edition Page 187
Win Compression formed 7/8oz. Unique 20.0gr WIN 209 and SP-16 1,338fps 9,600psi |
_________________ An ounce of fives, the smell of nitro in paper hulls, wet gundog, and Hoppe's #9... |
|
|
|
|
![](templates/NoseBleed/images/spacer.gif) |
|
Posted:
Wed Mar 28, 2018 6:31 pm
|
|
|
Joined: 13 Mar 2016
Posts: 31
Location: Twin Cities, MN.
|
|
Thanks guys. Does the DR16 wad work in this hull? I assume not since they are a tapered hull and the DR16 appears to be for straight walled hulls. Love the DR 16 wad for all other hulls. |
|
|
|
|
|
![](templates/NoseBleed/images/spacer.gif) |
|