16ga.com Forum Index
Author Message
<  16ga. Ammunition & Reloading  ~  Bismuth recipe
wingshooter
PostPosted: Sat Aug 18, 2018 1:24 pm  Reply with quote
Member
Member


Joined: 26 Jun 2005
Posts: 425
Location: Big D

I searched the site for some recipes, but came up blank. Anybody have one for 2 1/2 Cheddite 3/4 and 1 oz? I've also got Cheddite primers and International Clays on hand, but of course not limited to those components.

Thanks,
Mike

_________________
Consistency is the currency of credibility

Manufrance Ideal 314:
Barrel set 1- (choke) .000 , .007 , chamber 70mm
Barrel set 2- .025 , .047 , 65mm
Barrel set 3- .005, .015
Manufrance Ideal No. 5:
Choke: .000, .010, 70mm chambers
Back to top
View user's profile Send private message
Ohio Wirehair
PostPosted: Sat Aug 18, 2018 4:50 pm  Reply with quote



Joined: 24 Jul 2016
Posts: 546
Location: Ohio

This is the only 2 1/2" load for Cheddite listed in Precisions' Bismuth Manual.
Win.209 primer,17.5 grns Green Dot,TUWZ2M16GA wad, 3/4 oz of Bismuth shot, size 7 1/2 or smaller. 1291 FPS with a PSI of 11,010.
There are a couple of more for Federal and Remington cut to 2 1/2" and roll crimped that are much better sounding if you would like them.
Back to top
View user's profile Send private message
wingshooter
PostPosted: Sat Aug 18, 2018 7:02 pm  Reply with quote
Member
Member


Joined: 26 Jun 2005
Posts: 425
Location: Big D

Thank you sir, I would like to have them.

Mike

_________________
Consistency is the currency of credibility

Manufrance Ideal 314:
Barrel set 1- (choke) .000 , .007 , chamber 70mm
Barrel set 2- .025 , .047 , 65mm
Barrel set 3- .005, .015
Manufrance Ideal No. 5:
Choke: .000, .010, 70mm chambers
Back to top
View user's profile Send private message
Ohio Wirehair
PostPosted: Sat Aug 18, 2018 8:47 pm  Reply with quote



Joined: 24 Jul 2016
Posts: 546
Location: Ohio

From the Eighth Edition Bismuth Reloading Manual from Precision Reloading.
16 gauge Federal plastic hull with paper basewad cut to 2 1//2 inches with roll crimp
Win209 primer, 20 grains of Unique powder,Remington SP16 wad with 2 20 gauge .028 card wads( over shot),15/16 oz of Bismuth shot #4 or smaller. Velocity 1241 fps,PSI 7920.

16 gauge Remington hull 2 piece plastic cut to 2 1/2 inches and roll crimp.
Win. 209 primer, 16 grains of Green Dot, Remington SP16 wad with 2-20gauge .028 cards (over shot). 7/8 oz of Bismuth shot #4 or smaller. Velocity 1255 with the PSI being 11350.

Hope this helps, the Federal seems like a nice low pressure load. Good Luck!

As a side note I've found #4 Bismuth the perfect match for the 16 gauge.
Back to top
View user's profile Send private message
16gaDavis
PostPosted: Sun Aug 19, 2018 5:57 am  Reply with quote



Joined: 24 Jun 2013
Posts: 2062
Location: canandaigua - western n.y. (formerly deerhunter)

thanx again OW for those ... I'm going to be using the Unique load this yr in 25/8 and folded ... with those ballistics , I don't see why they wouldn't cross over to Chedd cases .

_________________
Molly sez AArrrooooooah !
Back to top
View user's profile Send private message
wingshooter
PostPosted: Sun Aug 19, 2018 6:28 am  Reply with quote
Member
Member


Joined: 26 Jun 2005
Posts: 425
Location: Big D

+1

_________________
Consistency is the currency of credibility

Manufrance Ideal 314:
Barrel set 1- (choke) .000 , .007 , chamber 70mm
Barrel set 2- .025 , .047 , 65mm
Barrel set 3- .005, .015
Manufrance Ideal No. 5:
Choke: .000, .010, 70mm chambers
Back to top
View user's profile Send private message
duckdup
PostPosted: Tue Aug 28, 2018 8:17 pm  Reply with quote



Joined: 12 Feb 2018
Posts: 258
Location: West-central Missouri

Thanks for the load data Ohio Wirehair

Had a pile of old Federal hulls, Win Primers, Unique, bismuth, and SP16s, just not the newer load manual. New Project!!!

Really good to know, now that Missouri is talking about non-toxic for doves on 36 public conservation areas...

_________________
An ounce of fives, the smell of nitro in paper hulls, wet gundog, and Hoppe's #9...
Back to top
View user's profile Send private message
Display posts from previous:   
All times are GMT - 7 Hours

View next topic
View previous topic
Page 1 of 1
16ga.com Forum Index  ~  16ga. Ammunition & Reloading

Post new topic   Reply to topic


 
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




Powered by phpBB and NoseBleed v1.09