16ga.com Forum Index
Author Message
<  16ga. Ammunition & Reloading  ~  Substitute Hull
Trail
PostPosted: Sun Nov 10, 2019 7:38 am  Reply with quote



Joined: 12 Dec 2009
Posts: 17
Location: Wisconsin

Hi all.
I found this load on a previous post here. Can I substitute Chedite Hull for the Federal?

1 1/8 oz
Hodgdon 800-X Win. 209 Rem. SP16 22.5 10,800 PSI 1,300

Thanks.
Back to top
View user's profile Send private message
MSM2019
PostPosted: Sun Nov 10, 2019 2:24 pm  Reply with quote



Joined: 04 Mar 2019
Posts: 1819
Location: Central ND

I have a very similar load using a CCI 209, 23.0 grains of 800-X. 1 1/8 oz. of lead and the SP-16 wad in a Federal hull.

1,270 FPS @ 9,800 PSI

I also have two identical loads one using a Federal hull the other a Cheddite and the ballistics are very similar, with the Cheddite having a slightly lower PSI.

When you get a chance I would send 6 loads to Tom Armbrust or Precision Reloading for verification.

DO NOT use anything but a Remington 209 PSTS or CCI 209 primer. A change to a Cheddite 209, Winchester 209, CCI 209M or a Federal 209A will require that you drop the powder drop anywhere from 2 to 4 grains of powder and it will reduce the velocity.

_________________
Mark...You are entitled to your own opinion. You aren't entitled to your own facts.
Back to top
View user's profile Send private message
Display posts from previous:   
All times are GMT - 7 Hours

View next topic
View previous topic
Page 1 of 1
16ga.com Forum Index  ~  16ga. Ammunition & Reloading

Post new topic   Reply to topic


 
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




Powered by phpBB and NoseBleed v1.09