16ga.com Forum Index
Author Message
<  16ga. Ammunition & Reloading  ~  16 gauge hulls
browningcollector
PostPosted: Sun Apr 05, 2020 1:23 pm  Reply with quote



Joined: 30 Nov 2006
Posts: 93
Location: Ohio

I have 300 plus of green Remington, black Remington, purple Federal, and some old Peters blue hulls. They are once or twice fired. What are the worth? I am in southern Ohio

Been awhile since I been on here

Thanks in advance

Kelly
Back to top
View user's profile Send private message Send e-mail
4setters
PostPosted: Mon Apr 06, 2020 8:00 pm  Reply with quote
Member
Member


Joined: 19 Nov 2013
Posts: 381
Location: NW Arkansas

At least the Peters blue hulls probably use the old Remington #57 size primer, which has not been made for several years. The green and black Rems could possibly use the #57 primer depending on how old they are, but probably use a 209 size primer (available) if they are relatively new. As far as I know, Federal has always used a 209 primer.

Most reloaders probably have no use for the Peters hulls (although some, like me, have scrounged old 57 primers and still occasionally reload a few), but the others have some value if they use 209 primers. Most are priced from 5 to 10 cents each when I see them advertized, but shipping cost can be substantial. However, hulls are advertised on this and other shotgun sites from time to time.

_________________
16 gauges:
1954 Win M12 IC
1952 Ithaca M37 Mod
1955 Browning Auto-5 Mod
1940 Ithaca NID M/F
1959 Beretta Silver Hawk
Ranger 103-II M/F
Browning A-5 Sweet 16
Browning Citori Invector
Rem 870 Remchoke
Back to top
View user's profile Send private message
MaximumSmoke
PostPosted: Mon Apr 06, 2020 8:21 pm  Reply with quote
Member
Member


Joined: 01 Dec 2005
Posts: 1550
Location: Minnesota and Florida

I'm a sucker for Peter's hulls, blue Hi Velocities or red Victors. I'll even shoot Remingtons as long as they are green Express or red ShurShots. I have a couple thousand Remington/Peters 57 size primers, and some CCI 157's -- Remington 57 equivalents.
Back to top
View user's profile Send private message
4setters
PostPosted: Tue Apr 07, 2020 8:41 am  Reply with quote
Member
Member


Joined: 19 Nov 2013
Posts: 381
Location: NW Arkansas

MSM,
I'm with you. I love the old translucent Peters/Rem hulls, where one can see through the plastic to the innards of the load! The Rem Shur Shots are my favorite. I don't think I have any left, but I used to have a lot of them that were brush loads from the factory, with what looked like 3 or 4 over the powder wads with shot between the OPWs. I load up some of these old shells from time to time usually with fiber wads--when I ain't loading up old paper hulls! Nostalgia, I guess.

_________________
16 gauges:
1954 Win M12 IC
1952 Ithaca M37 Mod
1955 Browning Auto-5 Mod
1940 Ithaca NID M/F
1959 Beretta Silver Hawk
Ranger 103-II M/F
Browning A-5 Sweet 16
Browning Citori Invector
Rem 870 Remchoke
Back to top
View user's profile Send private message
Display posts from previous:   
All times are GMT - 7 Hours

View next topic
View previous topic
Page 1 of 1
16ga.com Forum Index  ~  16ga. Ammunition & Reloading

Post new topic   Reply to topic


 
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




Powered by phpBB and NoseBleed v1.09