16ga.com Forum Index
Author Message
<  16ga. Ammunition & Reloading  ~  Remington wads & Bismuth
Ohio Wirehair
PostPosted: Tue May 19, 2020 4:03 pm  Reply with quote



Joined: 24 Jul 2016
Posts: 546
Location: Ohio

Ok,so here's my problem.I'm loading Precisions' 1 1/8 buffered load and had to drop to 1 1/16 to get the stack height right. These things pattern great at 40 yards couldn't ask for anything better. Very Happy However the wads are breaking in half at the crush section.It's not happening during loading but when firing. When I use them in Hodgdons 1 oz.recipe they hold up fine. The wads are a very dark Royal blue instead of a powder blue. Anybody have any idea what's going on.
Back to top
View user's profile Send private message
skeettx
PostPosted: Tue May 19, 2020 4:21 pm  Reply with quote
Member
Member


Joined: 15 Apr 2007
Posts: 9455
Location: Amarillo, Texas

The wads are doing their job.

What chokes are in the gun?

If removable, try a more open choke tube and see
if the wads still separate.

You have you patterned this load, and it does what you want it to do, GOOD

Mike

p.s. the only issue here is re-using the wads like we used to do overseas when components were hard to get Smile

p.s.s. you may be at the max limit of pressure and thrust for this wad,

maybe it will be better when it is colder. Have you put some in the freezer, then igloo, and then shot them to give that a try?

_________________
,
USAF RET 1971-95
Back to top
View user's profile Send private message Send e-mail
Ohio Wirehair
PostPosted: Tue May 19, 2020 4:36 pm  Reply with quote



Joined: 24 Jul 2016
Posts: 546
Location: Ohio

The guns a prewar Ithaca 37R with a poly on it. I refurbished it a few months ago and it has become my favorite gun. I'm in the process of patterning all settings with both lead and Bismuth. To steal one of your favorite sayings "WHAT FUN".
Back to top
View user's profile Send private message
MSM2019
PostPosted: Tue May 19, 2020 4:50 pm  Reply with quote



Joined: 04 Mar 2019
Posts: 1819
Location: Central ND

Are you using buffer with the 1 oz. load?

Can you see the buffer when you are ready to crimp?

Is the Hodgdon load bufferfd?

_________________
Mark...You are entitled to your own opinion. You aren't entitled to your own facts.
Back to top
View user's profile Send private message
skeettx
PostPosted: Tue May 19, 2020 4:51 pm  Reply with quote
Member
Member


Joined: 15 Apr 2007
Posts: 9455
Location: Amarillo, Texas

Yes, WHAT FUN!

Was on the right track, but now know more
I would suggest that the pressure is still up on this load
when the wad expands a bit in the polychoke and then is
torn on the trip through the choke.

I see no harm here and the heavier load is making better
use of the powder for a longer burn.

Slow burning powder?

Mike
Back to top
View user's profile Send private message Send e-mail
Ohio Wirehair
PostPosted: Tue May 19, 2020 6:51 pm  Reply with quote



Joined: 24 Jul 2016
Posts: 546
Location: Ohio

The buffered load is Remington hull,primer and wad. 24.8 grns of Blue Dot and 1 1/16 oz of shot. 12 grns. PSB buffer and a TS over the shot. When I add buffer I tap until the shot just starts to show then put the over shot TS in and crimp. Oh and as always I put about 10 pounds of pressure when I seat the wad. The other load is Remington hull and primer. Remington wad and 18 grns of Universal with 1 oz of shot no buffer. Both loads are just north of 11,000 according to the books.
Back to top
View user's profile Send private message
MSM2019
PostPosted: Wed May 20, 2020 3:43 am  Reply with quote



Joined: 04 Mar 2019
Posts: 1819
Location: Central ND

The non buffered load is a lot easier on the wad. The increased friction raises the chamber pressure and crushes the compressible section a lot more than it will on the non, buffered load.

Use more wad pressure on the buffered load and vibrate, don't tap in the PSB and the whole 1 1/8 oz. should fit. It will be tight.

_________________
Mark...You are entitled to your own opinion. You aren't entitled to your own facts.
Back to top
View user's profile Send private message
Display posts from previous:   
All times are GMT - 7 Hours

View next topic
View previous topic
Page 1 of 1
16ga.com Forum Index  ~  16ga. Ammunition & Reloading

Post new topic   Reply to topic


 
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




Powered by phpBB and NoseBleed v1.09