16ga.com Forum Index
Author Message
<  16ga. General Discussion  ~  Think I Solved The A5 Problem
Brewster11
PostPosted: Sat Aug 29, 2020 9:38 pm  Reply with quote



Joined: 08 Feb 2009
Posts: 1301
Location: Western WA

That sweet swinging soft shooting 16 ga A5 with its 25” open cyl barrel is without a doubt the most fun skeet gun in the house. But it jams with certain reloads, very frustrating especially with the rest of the squad waiting...watching...tapping their feet...saying nothing...while i extricate the offending shell.

But I think I solved the problem. It’s not the gun. It’s my reloads.

I use the Supersizer, so the brass is fine. But the plastic hull is problematic. New or once fired shells drop right in and rattle around the chamber and cycle fine. But after thrice, or four, or six reloads, there’s trouble...the plastic swells and sticks in the chamber. They refuse to feed, or chamber, or extract, or eject, or whatever. They jam.

What to do? With the Supersizer, it’s easy, Fit a paper cylinder made from thin card stock into the supersizer. Drop the finished cartridge into the Supersizer, head first, so the crimp and wad cup are inside the paper cylinder. Slam the lever down and voila, it’s done. Takes 2 seconds. The plastic section of the finished shell is narrower than before and falls into the chamber like a new shell.

We’ll see how this pans out over the next few weeks.

B.
Back to top
View user's profile Send private message
hoashooter
PostPosted: Sun Aug 30, 2020 1:33 pm  Reply with quote
Member
Member


Joined: 08 Nov 2005
Posts: 3436
Location: Illinois

OK---Can't say I agree w/your problem/solution.Would limit number of reloads OR adjust loader to fix problem.
Back to top
View user's profile Send private message
16gaDavis
PostPosted: Mon Aug 31, 2020 6:02 am  Reply with quote



Joined: 24 Jun 2013
Posts: 2062
Location: canandaigua - western n.y. (formerly deerhunter)

I have 2 versions of 12ga RST's . Blue 1oz , orange 3/4 . The blue are a little more stretched at the mouth end , and the orange are not . The blue are a little sticky , the orange are not . Used to run into the same thing with Fios when I had mixed 1oz and 11/8 . The plastic does stretch and begin being problematic . The reloading machine can fix the head sizing to some extent , but not the plastic . I believe you are on to the way to fixing the troubles with 3 piece cases and extending their life .

_________________
Molly sez AArrrooooooah !
Back to top
View user's profile Send private message
Brewster11
PostPosted: Mon Aug 31, 2020 9:16 pm  Reply with quote



Joined: 08 Feb 2009
Posts: 1301
Location: Western WA

Fios are very troublesome. The plastic hulls are sticking in the chamber so that the A5 is pulling the metal base off the plastic hull during ejection.

B.
Back to top
View user's profile Send private message
Display posts from previous:   
All times are GMT - 7 Hours

View next topic
View previous topic
Page 1 of 1
16ga.com Forum Index  ~  16ga. General Discussion

Post new topic   Reply to topic


 
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




Powered by phpBB and NoseBleed v1.09