Author |
Message |
< 16ga. Ammunition & Reloading ~ Herters and Fiocchi hulls |
|
Posted:
Thu Sep 10, 2020 6:01 am
|
|
|
Joined: 23 Apr 2010
Posts: 13
|
|
Do these hulls work with the clay buster 7/8 ounce wad, and are the Herters hulls Federal or Cheddite? I have been reloading Remingtons, but I have acquired a quantity of Herters and Fiocchi's.
cdb |
|
|
|
|
|
|
|
Posted:
Thu Sep 10, 2020 6:17 am
|
|
|
Member
Joined: 27 Jun 2012
Posts: 1113
|
|
My Herter hulls have the stars on the head, so I've been loading them like Cheddites. Not sure about the Claybuster wads. |
_________________ An elderly gentleman, his faithful dogs, and a 16 ga SXS. All is right with the world. |
|
|
|
|
|
|
Posted:
Thu Sep 10, 2020 6:23 am
|
|
|
Joined: 04 Mar 2019
Posts: 1841
Location: Central ND
|
|
Herter's hulls are actually Cheddites.
The CB0078-16 wad will work in the Herters and Fiocchi hulls, but probably not for 7/8 oz. loads. Those wads would work better as 1 oz. wads for that application. The other possible issue using the Herters and Fiocchi hulls with the CB0078-16 wad is powder migration with finer grain powders.
A better wad for 7/8 oz. loads would be the DR-16 from DownRange. Hopefully they will start making them again soon. |
_________________ Mark...You are entitled to your own opinion. You aren't entitled to your own facts. |
|
|
|
|
|
|
Posted:
Thu Sep 10, 2020 7:22 am
|
|
|
Joined: 23 Apr 2010
Posts: 13
|
|
I have 1,450 DR-16 wads, I will use them in the Fiocchi, and Herters hulls, they do not work in the Remington hull with 7/8 ounce of shot.
cdb |
|
|
|
|
|
|
|
Posted:
Thu Sep 10, 2020 7:38 am
|
|
|
|
For 7/8 oz loads I use the CB0078-16 in Remington hulls, and the DR16 in Cheddite/Herter's/Federal hulls. |
|
|
|
|
|
|
|
Posted:
Thu Sep 10, 2020 8:25 am
|
|
|
Joined: 23 Apr 2010
Posts: 13
|
|
Thanks everyone, I have all the materials to load all 3 hulls.
cdb |
|
|
|
|
|
|
|