Author |
Message |
< 16ga. Guns ~ Another 16 has joined me...Fox A Grade |
|
Posted:
Wed Feb 17, 2021 9:31 am
|
|
|
Joined: 16 Jul 2015
Posts: 2124
Location: Hudson,Wy
|
|
Inletting depth will be the primary concern if the stock is the issue. The depth of inletting under the top tang and under the trigger plate, and more importantly the space between the two, will affect sear engagement and safety engagement as well.
The other issue with inletting can be insufficient clearance, allowing a sear or striker (hammer) to rub. There's only one way to check these things, and it requires proper fitting screwdriver bits plus careful technique to avoid buggering the screw slots. If a problem really exists, the stock must come off for inspection. |
_________________ Only catch snowflakes on your tongue AFTER the birds fly south for the winter... |
|
|
|
|
|
|
Posted:
Fri Feb 19, 2021 8:46 am
|
|
|
Joined: 09 Aug 2007
Posts: 437
Location: WI
|
|
Researcher wrote: |
None of the wood is original. Firing problem may be with the inletting of the new stock.
|
I agree. Definitely not original wood. |
|
|
|
|
|
|
|