Author |
Message |
< 16ga. Ammunition & Reloading ~ Anybody have good data for reloading Nobelsport? |
|
Posted:
Thu Feb 25, 2021 8:48 pm
|
|
|
Joined: 06 Jan 2021
Posts: 89
Location: Florida
|
|
While I have a 100 ish factory loads of RGL’s that will be used reloads in the future for my 16’s. I also have a case of Nobelsport abs from my shooting so far I really like them. After a search it seems there isn’t a ton of data for reloading the Nobelsport hulls yet using non European powders and wads.
I will need to source some Nobel primers, but I have imr green, imr Blue, alliant steel in my reloading room at this time and will hopefully be adding longshot when it’s available. I’m mainly looking for wad choices and any load data you have found or had tested. Just looking ahead to the future. |
|
|
|
|
|
|
|
Posted:
Fri Feb 26, 2021 8:31 am
|
|
|
Member
Joined: 01 Dec 2005
Posts: 1550
Location: Minnesota and Florida
|
|
NobelSport is Martignoni. Martignoni hulls are so much like today's Fiocchi's and Cheddites I doubt anyone could tell the difference in internal and external ballistics produced with exactly the same loads. |
|
|
|
|
|
|
|