Author |
Message |
< 16ga. Guns ~ Merkel butt plate,Buffalo Horn |
|
Posted:
Sun Jun 27, 2021 8:41 am
|
|
|
Joined: 31 Jan 2013
Posts: 152
Location: San Diego
|
|
|
|
|
|
|
Posted:
Sun Jun 27, 2021 11:25 am
|
|
|
Member
Joined: 15 Apr 2007
Posts: 9455
Location: Amarillo, Texas
|
|
|
_________________
,
USAF RET 1971-95 |
|
|
|
|
|
|
Posted:
Sun Jun 27, 2021 3:21 pm
|
|
|
Joined: 31 Jan 2013
Posts: 152
Location: San Diego
|
|
Progress, I think I'll stay with the lazy "skip diamond" layout. The white lines are the cuts, rough or dusty? They'll be black when polished/oiled. Needs deepening, arms got tired. I did have to sharpen the thread chaser with a diamond tri-corner file. 3.00mm pitch.
|
_________________ It's not how many breaths you take, it's how many times you have been breathless.
Dying with all ten fingers is like dying with money in the bank- you could have had more fun! |
|
|
|
|
|
|
Posted:
Mon Jun 28, 2021 11:04 am
|
|
|
Joined: 31 Jan 2013
Posts: 152
Location: San Diego
|
|
A little more filing, wetted w/water. After pic, some fine sanding and a coat of varnish. Enough pics.
Oh,3.00mm pitch was a misytake. The teeth rows are 3mm apart- they kinda got stuck in the cross-rows of the checkering. It was hard to get started smoothly,harder to follow the previous groove.
[/img] |
_________________ It's not how many breaths you take, it's how many times you have been breathless.
Dying with all ten fingers is like dying with money in the bank- you could have had more fun! |
|
|
|
|
|
|
Posted:
Mon Jun 28, 2021 1:22 pm
|
|
|
Joined: 17 Oct 2019
Posts: 453
Location: New Jersey
|
|
Nice work, that looks great ! |
|
|
|
|
|
|
|
Posted:
Mon Jun 28, 2021 9:27 pm
|
|
|
Joined: 19 Jan 2019
Posts: 283
Location: Idaho & South Dakota
|
|
Very nice |
_________________ "A gun should be a thing of beauty, something which gives its owner pride and pleasure. For that reason, most men will buy the best gun they can afford. With a good gun on his arm, a man becomes a sporting gentleman, both on the field and off." |
|
|
|
|
|
|
Posted:
Thu Jul 01, 2021 2:33 pm
|
|
|
Joined: 12 Sep 2010
Posts: 1972
Location: Maine
|
|
God love you, horn is nasty stuff to work. Nice job.
On layout, you might want to go with a very sharp, stubby knife blade to start the cut lines. A fine grease pencil or white china pencil works great for layout, too. Pictures to follow immediately below, thanks to Skeettx.
Top pic is layout, done by a friend with a razor-sharp stub of a pocketknife. He had used a layout template to put the lines on the butt. Then followed the layout lines with the knife point to start the cuts.
Bottom pic is the finished checkering job, done with usual checkering tools. |
Last edited by Dave in Maine on Thu Jul 01, 2021 3:53 pm; edited 1 time in total _________________ “A man’s rights rest in three boxes: the ballot box, the jury box, and the cartridge box.”
Frederick Douglass, November 15, 1867, speech in Williamsport, Pa. |
|
|
|
|
|
|
Posted:
Thu Jul 01, 2021 3:46 pm
|
|
|
Member
Joined: 15 Apr 2007
Posts: 9455
Location: Amarillo, Texas
|
|
For Dave
|
_________________
,
USAF RET 1971-95 |
|
|
|
|
|
|
Posted:
Sat Jul 03, 2021 3:08 pm
|
|
|
Joined: 31 Jan 2013
Posts: 152
Location: San Diego
|
|
Dave in Maine wrote: |
God love you, horn is nasty stuff to work. Nice job.
On layout, you might want to go with a very sharp, stubby knife blade to start the cut lines. A fine grease pencil or white china pencil works great for layout, too. Pictures to follow immediately below, thanks to Skeettx.
Top pic is layout, done by a friend with a razor-sharp stub of a pocketknife. He had used a layout template to put the lines on the butt. Then followed the layout lines with the knife point to start the cuts.
Bottom pic is the finished checkering job, done with usual checkering tools.
|
Nice! Much cleaner and preciser then mine.
The last time needed checkering tools I needed 1mm, 25 lpi. No such critter- not in America. I ground away half of a 8mm x 1.0 bolt. Held it in little vise grips.
I had to blend in some bedding compound after repairing as stock broke right in half at the wrist. I drilled out the stock bolt hole and implanted an aluminum tube to hold things together. The Browning's owner was impressed. In fact that was when I ordered the metric thread chasing file. But it wouldn't work on the concave hand grip.
This time I designed around the tool. Convex all over. Hours worth of entertainment for $8 tool, $7 dog chew. And I learned some new techniques. |
_________________ It's not how many breaths you take, it's how many times you have been breathless.
Dying with all ten fingers is like dying with money in the bank- you could have had more fun! |
|
|
|
|
|
|
Posted:
Wed Jul 07, 2021 6:04 am
|
|
|
Joined: 12 Sep 2010
Posts: 1972
Location: Maine
|
|
casebro wrote: |
Dave in Maine wrote: |
God love you, horn is nasty stuff to work. Nice job.
On layout, you might want to go with a very sharp, stubby knife blade to start the cut lines. A fine grease pencil or white china pencil works great for layout, too. Pictures to follow immediately below, thanks to Skeettx.
Top pic is layout, done by a friend with a razor-sharp stub of a pocketknife. He had used a layout template to put the lines on the butt. Then followed the layout lines with the knife point to start the cuts.
Bottom pic is the finished checkering job, done with usual checkering tools.
|
Nice! Much cleaner and preciser then mine.
The last time needed checkering tools I needed 1mm, 25 lpi. No such critter- not in America. I ground away half of a 8mm x 1.0 bolt. Held it in little vise grips.
I had to blend in some bedding compound after repairing as stock broke right in half at the wrist. I drilled out the stock bolt hole and implanted an aluminum tube to hold things together. The Browning's owner was impressed. In fact that was when I ordered the metric thread chasing file. But it wouldn't work on the concave hand grip.
This time I designed around the tool. Convex all over. Hours worth of entertainment for $8 tool, $7 dog chew. And I learned some new techniques.
|
To be accurate, the buttplate shown in my pictures is ebony, not horn. My friend who did the work is a gunsmith and stocker. He quit working horn unless the client really, really, really wants it and is willing to pay to get him over his reluctance. The butt plates that drove him nuts were those with "simple" parallel lines. Also horn can be more difficult to work than harder materials like ebony.
You did nice work. |
_________________ “A man’s rights rest in three boxes: the ballot box, the jury box, and the cartridge box.”
Frederick Douglass, November 15, 1867, speech in Williamsport, Pa. |
|
|
|
|
|
|
Posted:
Thu Jul 08, 2021 2:35 pm
|
|
|
Joined: 31 Jan 2013
Posts: 152
Location: San Diego
|
|
Dave in Maine wrote: |
........
To be accurate, the buttplate shown in my pictures is ebony, not horn. My friend who did the work is a gunsmith and stocker. He quit working horn unless the client really, really, really wants it and is willing to pay to get him over his reluctance. The butt plates that drove him nuts were those with "simple" parallel lines. Also horn can be more difficult to work than harder materials like ebony.
You did nice work.
|
Thank you for another compliment.
Difficulty in work-ability depends on what type of tool you use. Ebony would work like butter-if you friend has a rotary power checking tool. Which which I would HATE to do horn. Stinky when hot, dustin your face, probably gum up the wheel too. |
_________________ It's not how many breaths you take, it's how many times you have been breathless.
Dying with all ten fingers is like dying with money in the bank- you could have had more fun! |
|
|
|
|
|
|
Posted:
Sun Aug 08, 2021 7:08 pm
|
|
|
Member
Joined: 25 Jun 2008
Posts: 1863
Location: Wisconsin
|
|
Love the buttplate, would be slick enough not to catch on my coat and grippy enough when I pulled it into my shoulder socket. Very nice. Reno |
_________________ If you speak ill of farmers, don't do it with your mouth full. |
|
|
|
|
|
|