Author |
Message |
< 16ga. General Discussion ~ Anybody have the dimensions for .. |
|
Posted:
Tue Jan 11, 2022 4:34 am
|
|
|
Joined: 16 Nov 2006
Posts: 367
|
|
the Browning A5 wooden plugs?
Need to make two for my gagle of A5's. Need the 12 & 16.
Thsnkd. |
|
|
|
|
|
|
|
Posted:
Tue Jan 11, 2022 4:51 am
|
|
|
Joined: 03 Sep 2014
Posts: 398
Location: Rochester, MN
|
|
The guns are Auto-5s. The magazine tubes hold 4 rounds (one goes in the chamber). Measure the combined length of two crimped cartridges.
Take a 3/8 dowel and cut to that length. Insert in the end of the magazine tube. |
_________________ John Singer |
|
|
|
|
|
|
Posted:
Tue Jan 11, 2022 6:37 am
|
|
|
Member
Joined: 09 Jan 2013
Posts: 2170
Location: Florida
|
|
I googled it and fold one place that said 6.3" for a 2 3/4" gun .
I'd do the wood dowel or pencil and keep cutting till you can only fit 2 in the mag tube. |
|
|
|
|
|
|
|
Posted:
Wed Jan 12, 2022 3:42 am
|
|
|
Joined: 16 Nov 2006
Posts: 367
|
|
have a large knob, that dropped onto the "spring retainer" at the top of the magazine?
thanks. |
|
|
|
|
|
|
|
Posted:
Wed Jan 12, 2022 7:39 am
|
|
|
Member
Joined: 15 Apr 2007
Posts: 9469
Location: Amarillo, Texas
|
|
|
|
|
|
|
Posted:
Wed Jan 12, 2022 1:17 pm
|
|
|
Joined: 03 Sep 2014
Posts: 398
Location: Rochester, MN
|
|
$57 for a wooden stick? |
_________________ John Singer |
|
|
|
|
|
|
Posted:
Wed Jan 12, 2022 5:46 pm
|
|
|
Member
Joined: 15 Apr 2007
Posts: 9469
Location: Amarillo, Texas
|
|
COME ON !! All you 16 gauge shooters must be RICH
My purpose was to show confirmation and over all length, so jrothWA
can make one or more for himself
Mike |
|
|
|
|
|
|
|
Posted:
Wed Jan 12, 2022 9:47 pm
|
|
|
Joined: 16 Nov 2006
Posts: 367
|
|
|
|
|
|
|
Posted:
Sat Jan 15, 2022 9:40 am
|
|
|
Joined: 25 Dec 2018
Posts: 6
|
|
skeettx wrote: |
COME ON !! All you 16 gauge shooters must be RICH
My purpose was to show confirmation and over all length, so jrothWA
can make one or more for himself
Mike
|
Not many 16 gauge shooters are very ruch, especially with the cost to feed the guns now! |
|
|
|
|
|
|
|
Posted:
Sat Jan 15, 2022 10:00 am
|
|
|
Joined: 30 Jul 2012
Posts: 318
Location: Central, ND
|
|
I’ll get you measurements. Are you making these on a lathe? If so I’d buy a few from you if you are interested in selling some |
_________________ Browning 525 Sporting 16ga
Browning BPS Gr III 16ga |
|
|
|
|
|
|
Posted:
Sat Jan 15, 2022 2:16 pm
|
|
|
Joined: 30 Jul 2012
Posts: 318
Location: Central, ND
|
|
Not a great print but it should have everything you need. I don’t have a 12 gauge to measure. |
_________________ Browning 525 Sporting 16ga
Browning BPS Gr III 16ga |
|
|
|
|
|
|