Author |
Message |
< 16ga. Ammunition & Reloading ~ ACTIV 16 gauge recipe |
|
Posted:
Fri Oct 14, 2022 6:17 am
|
|
|
Joined: 07 Apr 2014
Posts: 17
Location: Meridian, Idaho
|
|
OMG. Yesterday I snagged 6 boxes of the red ACTIV factory shells, almost two pretty to shoot, not quite! I have the 16 gauge wads from Ballistic Products, does anyone have a load sheet for a 7/8 oz target load? Much appreciated![/quote] |
_________________ 1938 Model 12 16 Gauge Skeet, Full Restoration!
1953 Model 12 16 Gauge Field Gun
1962 Remington 870 Sorta Field/Sorta Target |
|
|
|
|
|
|
Posted:
Fri Oct 14, 2022 6:28 am
|
|
|
Joined: 09 Feb 2015
Posts: 824
|
|
I've got a flat of 6's 3 1/4 dram. I just use the empties for my reload on geese, ducks |
|
|
|
|
|
|
|
Posted:
Fri Oct 14, 2022 7:04 am
|
|
|
Joined: 07 Jun 2020
Posts: 229
|
|
Activ hull, win209 primer, 17.0 grns. Unique powder, SG16 wad, 7/8 oz lead shot, 7,100 PSI, 1120 FPS
Activ hull, win 209 primer, 21 grns WSF powder, SG16 Wad, 7/8 oz lead shot, 8,100 PSI, 1210 FPS |
|
|
|
|
|
|
|
Posted:
Fri Oct 14, 2022 7:28 am
|
|
|
Joined: 01 Oct 2007
Posts: 962
Location: Minnesota
|
|
I have 100 of these hulls, they were new unprimed when I got them. I load one ounce loads and they load up and shoot real nice. |
|
|
|
|
|
|
|
Posted:
Fri Oct 14, 2022 8:03 am
|
|
|
Joined: 22 May 2020
Posts: 268
Location: Ky
|
|
|
_________________ “Never use an ugly gun to kill a beautiful bird” |
|
|
|
|
|
|
Posted:
Fri Oct 14, 2022 9:39 am
|
|
|
Joined: 21 Mar 2019
Posts: 523
Location: Texas
|
|
Now if I only had some of those 16ga activ hulls |
|
|
|
|
|
|
|
Posted:
Sat Oct 15, 2022 3:11 pm
|
|
|
Member
Joined: 19 May 2006
Posts: 315
Location: Too far south in New England
|
|
I’m hoarding mine
Loaded up 300 for combo grouse loads (5 + 7.5). That should last me & my son quite a while. They are finicky to crimp, IMO. But once you get it, they come out great. |
_________________ "You keep saying that word. I do not think it means what you think it means" - Inigo Montoya |
|
|
|
|
|
|
Posted:
Tue Nov 22, 2022 4:54 pm
|
|
|
Joined: 09 Feb 2015
Posts: 824
|
|
I've got a full box of Remington factory 11/4oz. Wish I knew what their powder was in them hulls. Don't want to take one apart. Afraid I wouldn't be able to identify the powder.
Some where in my old lyman manuals I seen a 1 1/4oz load. It should be easy to stuff 1 1/4 oz in active. |
|
|
|
|
|
|
|
Posted:
Wed Nov 23, 2022 7:16 pm
|
|
|
Joined: 24 Jun 2013
Posts: 2067
Location: canandaigua - western n.y. (formerly deerhunter)
|
|
a 7/8 load would have to be interpretive - 1oz was the lightest load published then . But , the loads could be integrated from what the guys posted here . And , I can tell you personally that I sure do wish the DR was avil then ! It makes nice little loads NOW if you have some ! |
_________________ Molly sez AArrrooooooah ! |
|
|
|
|
|
|