Author |
Message |
< 16ga. Guns ~ Anybody ever bead blasted an action |
|
Posted:
Thu May 17, 2007 2:29 pm
|
|
|
Joined: 24 Jan 2007
Posts: 14
Location: Ontario Canada
|
|
I have an old Winchester model 24 I picked up a few years ago really cheap. The bluing on barrels isn't bad but a previous owner engraved his name on the bottom of the action. Fortunately the etching wasn't deep and I was able to polish it out. Now the action is half polished and half blue. I would reblue the whole gun but nobody around my area will cold blue only hot blue. I don't think the soldering on the barrels will take it in any case. I have used chemical cold blue bluing in the past but found they either rusted the metal or the colour is not consistant. I thought I might bead blast the action. Anybody try it? What were the results? Any other suggestions. |
|
|
|
|
|
|
|
Posted:
Thu May 17, 2007 3:47 pm
|
|
|
Member
Joined: 02 Feb 2006
Posts: 602
Location: western pa
|
|
A friend of mine did an old Parker VH 16 that he found rusted in the corner of an old barn grainery. He had the barrels sleeved and wood replaced. The only thing he could do, short of sending it to Turnbull, was try the bead blaster and black the action. Surprised me how well it turned out. Your gun should have a black action so it should look alright, but it will be a flat finish. |
_________________ Always get get a drink upstream of the herd-Will Rogers |
|
|
|
|
|
|
Posted:
Thu May 17, 2007 8:35 pm
|
|
|
Member
Joined: 02 Dec 2006
Posts: 741
Location: Long Island, NY
|
|
How about taking some "Flitz" and polishing the action, and leaving the barrels alone. Originality goes out the window, but picturing it in my mind, it may look nice. |
_________________ "Be who you are and say what you feel because those who mind don't matter and those who matter don't mind" ... Dr. Seuss
"There aint nothin' better than huntin' with a Setter" |
|
|
|
|
|
|
Posted:
Fri May 18, 2007 8:34 pm
|
|
|
Member
Joined: 06 Nov 2006
Posts: 128
Location: NE
|
|
Most 24's lost the blue on the bottom of the reciever soon followed by the sides and top and then the barrels anyway.
Cold blue won't take very well. It will wear off almost as fast as it goes on.
If you really want it blued just have the action done. If you carry it afield much it will wear to match pretty well in a couple of years. I've seen quite a few 24's that had the action reblued.
Either that or ship the whole gun off to somebody that will do it right.
My dad's (12 ga.) 24 was the first shotgun I ever shot. He bought it used in about '54 after he was back from Korea and by the time he hung it up and bought an A-5 in '72 I think the only blueing left on it was under the forend wood. He had touched it up with cold blue a couple of times, but it wouldn't last a season. He kept it until just a couple of years ago and then traded it off without letting me or my brothers know, I think he didn't want us to get into a fight over it.
berg |
|
|
|
|
|
|
|