Author |
Message |
< 16ga. Guns Wanted or For Sale ~ FAIR Model 500 |
|
Posted:
Mon Jan 07, 2008 10:54 pm
|
|
|
Joined: 06 Aug 2007
Posts: 129
Location: Alabama
|
|
I'm a bit new to the 16 ga phenom but i have been reading a good bit on the Rizzini's's's. I thought i knew the basic product line (400, 600, 702, 900 etc) but this 500 threw me for a loop. Its listed at gunsamerica for $1699 and i was wondering what you learned folks thought. Any info is greatly appreciated.
http://www.gunsamerica.com/976975637/Guns/Shotguns/Rizzini-Shotguns/FAIR_Model_500_16Ga.htm |
_________________ Character is more easily kept than recovered! |
|
|
|
|
|
|
Posted:
Tue Jan 08, 2008 9:54 am
|
|
|
Joined: 01 Jun 2006
Posts: 268
Location: Meridian, ID
|
|
Harry
The 500 is just another version of the FAIR O/U. Don't know what the difference is between a 400 and 500 is. Maybe a slightly higher grade of wood.
As far as the price? Might be a high by $100-$200. There is a used 20ga Model 500 on gunbroker with an opening bid of $1,450.00 and no reserve.
Send them an email and ask what they'll sell it for. |
_________________ If, after I depart this vale, you ever remember me and have thought to please my ghost, forgive some sinner and wink your eye at some homely girl.
H.L. Mencken |
|
|
|
|
|
|
Posted:
Tue Jan 08, 2008 6:27 pm
|
|
|
Member
Joined: 31 Aug 2007
Posts: 238
Location: Lodi, CA
|
|
I would tend to agree. I bit high. I purchased a B. Rizzini Aurum 16 ga. for $1750. I know of another that is LNIB for $2000. The B. Rizzinis are finished a little nice and have little better wood than the Isodoro Rizzini 400, 500, or 600. The disadvantage is that unless you are lucky enough to find a Aurum Light, they are a little heavier. |
|
|
|
|
|
|
|
Posted:
Tue Jan 08, 2008 8:42 pm
|
|
|
Joined: 06 Jul 2006
Posts: 43
|
|
I think asking the lowest price they will accept is not a winning tactic. If you want it at $1450, offer that. The worst that can happen is you are turned down - or negotiate something in between. |
|
|
|
|
|
|
|
Posted:
Tue Jan 08, 2008 9:06 pm
|
|
|
Joined: 06 Aug 2007
Posts: 129
Location: Alabama
|
|
The blue book on the Aurum classic doesnt list anything but a "light" in 16 gauge as far as i can tell. Do you guys know of a non light 16 gauge? |
_________________ Character is more easily kept than recovered! |
|
|
|
|
|
|
Posted:
Tue Jan 08, 2008 10:13 pm
|
|
|
Member
Joined: 31 Aug 2007
Posts: 238
Location: Lodi, CA
|
|
My understanding, and I could very well be wrong on this, is that the 16ga. Aurum Light is made with an alloy receiver and weighs around 6lbs. The 16ga. standard Aurum weighs about 7lbs (which I have).
I personally have not seen any Aurum Lights for sale and am going off what I see on the "Post the weigth of your 16ga." thread. |
|
|
|
|
|
|
|
Posted:
Tue Jan 08, 2008 11:12 pm
|
|
|
Joined: 01 Jun 2006
Posts: 268
Location: Meridian, ID
|
|
|
|
|
|
|
Posted:
Wed Jan 09, 2008 9:04 am
|
|
|
|
A little high indeed. I picked up FAIR 600 Gold NIB for $1,730. This one might be OK at $1,200 to $1,400. |
|
|
|
|
|
|
|
Posted:
Wed Jan 09, 2008 5:25 pm
|
|
|
Joined: 01 Jun 2006
Posts: 268
Location: Meridian, ID
|
|
|
|
|
|
|
Posted:
Wed Jan 09, 2008 5:46 pm
|
|
|
Member
Joined: 31 Aug 2007
Posts: 238
Location: Lodi, CA
|
|
Nutcase -Do all Aurum Lights come with silver frames and the gold bird, or are some case colored?
Thanks,
David |
|
|
|
|
|
|
|
Posted:
Wed Jan 09, 2008 7:49 pm
|
|
|
Member
Joined: 15 Feb 2006
Posts: 135
Location: Anchorage
|
|
A question was asked about the availability of case hardened farmes on the light guns. I believe that all aurum lights will have the nickel colered alloy frames and none of them will be case colored. They are not steel so they would not be case colored.
If I am not mistaken the older 16's, whether Aurum light frames or standard frames, were built on the 12 gauge frame. The new ones would be built on a true 16 gauge frame. William Larkin Moores web page indiates that both the Aurum light i6 and 12 weigh about 6 pounds 4 ounces though I think this was written when they were both on the 12 gauge frame so there may have been a change in weight for the 16. |
|
|
|
|
|
|
|
Posted:
Wed Jan 09, 2008 9:09 pm
|
|
|
Joined: 06 Aug 2007
Posts: 129
Location: Alabama
|
|
MGF, $1730 for a New 600 sounds pretty nice...mind telling where? |
_________________ Character is more easily kept than recovered! |
|
|
|
|
|
|
Posted:
Wed Jan 09, 2008 10:57 pm
|
|
|
Joined: 01 Jun 2006
Posts: 268
Location: Meridian, ID
|
|
David, as far as I know that is the only way they have been made. I'm no expert but I don't know if it's possible to case colored them. Maybe after the receiver has been plated or some funky anodizing might work.
The Rizzini USA site doesn't list the Aurum Light. The Italian site does and only list the gun as nickel plated with gold inlays.
http://www.rizzini.it/eng/home.html
Harry, I think MGF getting that gun for that price, especially if it was new, was like finding a pot of gold at the end of a rainbow. Never seen a new one for less than about $2,100.00. |
_________________ If, after I depart this vale, you ever remember me and have thought to please my ghost, forgive some sinner and wink your eye at some homely girl.
H.L. Mencken |
|
|
|
|
|
|
Posted:
Thu Jan 10, 2008 7:03 am
|
|
|
Joined: 06 Aug 2007
Posts: 129
Location: Alabama
|
|
Thx! I've been offered a 600 gold 16 with 26" barrels for 1900 which seems to be in line with blue book but I can't put my hands on it you know. I've seem pics and they look great. What do you guys think? |
_________________ Character is more easily kept than recovered! |
|
|
|
|
|
|
Posted:
Thu Jan 10, 2008 8:18 pm
|
|
|
Joined: 01 Jun 2006
Posts: 268
Location: Meridian, ID
|
|
Harry, now that its time to spend your money nobody seems interested. I'm not that way(though I tried to let someone else go first .) So I'll share my vast amounts of wisdom/opinion.
I'd go with the original gun you posted if you can get them to come down in price a little for the following reasons/preferences:
1. the model 500 has 28" barrels, the 600 26" barrels
2. Whether it be high grade wood or engraved side plates they don't add to the feel/handling of the gun and I'm not willing to pay extra for them.
Your preference might be different than mine of course. I think you could do well with all the guns posted on this thread. Its really just a matter of what works best for you. Since you can't handle any of these guns prior to purchase, I'd make sure you get an unconditional right to return the gun if you decide to buy one of them.
Good Luck. |
_________________ If, after I depart this vale, you ever remember me and have thought to please my ghost, forgive some sinner and wink your eye at some homely girl.
H.L. Mencken |
|
|
|
|
|
|