Author |
Message |
< 16ga. Ammunition & Reloading ~ 2 1/2 low pressure recipe |
|
Posted:
Sun Aug 10, 2008 2:27 pm
|
|
|
Member
Joined: 26 Jun 2005
Posts: 425
Location: Big D
|
|
While I am a member of the low pressure reloading group, I seem to have misplaced the cd with recipes. I have RGL, Cheddite, and Federal hulls, and am looking for a low pressure load for the black powder proofed E. James damascus hammergun. Some friends are supposed to give me some recipes, but I thought I'd toss it out to the group. I wanted to take a few dove with it, and Sept. 1 is fast approaching. The only wads I have on hand are the SP16's, but could try to get some other ones in time. 3/4 or 7/8 would be good.
Thanks,
Mike |
_________________ Consistency is the currency of credibility
Manufrance Ideal 314:
Barrel set 1- (choke) .000 , .007 , chamber 70mm
Barrel set 2- .025 , .047 , 65mm
Barrel set 3- .005, .015
Manufrance Ideal No. 5:
Choke: .000, .010, 70mm chambers |
|
|
|
|
|
|
Posted:
Mon Aug 11, 2008 11:11 am
|
|
|
Member
Joined: 18 Aug 2006
Posts: 114
Location: Tucson, AZ
|
|
Send me you e-mail address and I will "mail" you a list. |
_________________ Leave this camp ground a little better than you found it. |
|
|
|
|
|
|
Posted:
Mon Aug 11, 2008 1:52 pm
|
|
|
|
wingshooter wrote: |
While I am a member of the low pressure reloading group, I seem to have misplaced the cd with recipes. I have RGL, Cheddite, and Federal hulls, and am looking for a low pressure load for the black powder proofed E. James damascus hammergun. Some friends are supposed to give me some recipes, but I thought I'd toss it out to the group. I wanted to take a few dove with it, and Sept. 1 is fast approaching. The only wads I have on hand are the SP16's, but could try to get some other ones in time. 3/4 or 7/8 would be good.
Thanks,
Mike
|
You should have received an e-mail inviting to join the 16 gauge loaders group on Yahoo when you joined the 16 gauge loaders group. If you did follow the instructions and you will be able to access all of the files that are on the CD on line. If you lost the invitation get in touch with Russ Gray. |
|
|
|
|
|
|
|
Posted:
Mon Aug 11, 2008 2:55 pm
|
|
|
Joined: 19 Feb 2008
Posts: 443
|
|
Is there a spread sheet later than 1-16-07?
Thanks, sv |
|
|
|
|
|
|
|
Posted:
Thu Aug 14, 2008 4:29 pm
|
|
|
Member
Joined: 16 Aug 2004
Posts: 317
|
|
steve voss wrote: |
Is there a spread sheet later than 1-16-07?
Thanks, sv
|
Not yet, but soon. I have to scan and upload a bunch of new tested loads, then work on the spreadsheets. |
|
|
|
|
|
|
|
Posted:
Thu Aug 14, 2008 4:30 pm
|
|
|
Member
Joined: 16 Aug 2004
Posts: 317
|
|
wingshooter wrote: |
While I am a member of the low pressure reloading group, I seem to have misplaced the cd with recipes. I have RGL, Cheddite, and Federal hulls, and am looking for a low pressure load for the black powder proofed E. James damascus hammergun. Some friends are supposed to give me some recipes, but I thought I'd toss it out to the group. I wanted to take a few dove with it, and Sept. 1 is fast approaching. The only wads I have on hand are the SP16's, but could try to get some other ones in time. 3/4 or 7/8 would be good.
Thanks,
Mike
|
Mike:
Send me your e-mail address via the PM feature. I'll get you back on line withthe group. Russ |
|
|
|
|
|
|
|
Posted:
Thu Aug 14, 2008 5:05 pm
|
|
|
Member
Joined: 26 Jun 2005
Posts: 425
Location: Big D
|
|
Thanks Russ. |
_________________ Consistency is the currency of credibility
Manufrance Ideal 314:
Barrel set 1- (choke) .000 , .007 , chamber 70mm
Barrel set 2- .025 , .047 , 65mm
Barrel set 3- .005, .015
Manufrance Ideal No. 5:
Choke: .000, .010, 70mm chambers |
|
|
|
|
|
|