| Author |
Message |
| < 16ga. Ammunition & Reloading ~ I need a 7/8ths and 3/4 load for rex #1 powder. anyone? |
|
 Posted:
Sat Feb 21, 2009 3:07 pm
|
|
|
Member
Joined: 25 Sep 2008
Posts: 52
Location: northern minnesota
|
|
i will be using cut off federal hulls to 2/9/16ths. bp 16 ga sporting
wadd. charles i think you may have one. thanks in advance. bluerock |
|
|
|
|
|
 |
|
| Posted:
Sat Feb 21, 2009 7:23 pm
|
|
|
Member
Joined: 02 Feb 2007
Posts: 1734
Location: Central Missouri
|
|
Hello Bluerock :
65MM Cheddite hull , cheddite primer , Gualandi 1618 or 1621 , 3/4 OZ shot 18grains of Rex - 1 = 1410 fps @ 9200 PSI
Same above except 16.5 grain of Rex - 1 = 1325 fps
Federal Hull no difference just a little lower pressure and little less velocity .
Regards Charles
I have a few more we have tested in Red Dot if you need them . |
|
|
|
|
|
|
|
| Posted:
Sat Feb 21, 2009 8:49 pm
|
|
|
Member
Joined: 25 Sep 2008
Posts: 52
Location: northern minnesota
|
|
thank you very much charles. i`ll try a couple sunday on the high tower.
have a great weekend, bluerock. |
|
|
|
|
|
|
|
| Posted:
Mon Feb 23, 2009 8:41 am
|
|
|
Joined: 28 Jan 2007
Posts: 129
Location: hong kong
|
|
Charles, any insight on how the Rex 1 load will change with the new 3/4 ounce CHDR3/42009 wad?
AjaxFjr. |
|
|
|
|
|
|
|
| Posted:
Mon Feb 23, 2009 6:43 pm
|
|
|
Member
Joined: 02 Feb 2007
Posts: 1734
Location: Central Missouri
|
|
Where did you get that number ??? But I anticipate the pressures to have dropped with the longer hull length all thing being the same .
Regards Charles |
|
|
|
|
|
|
|
| Posted:
Mon Feb 23, 2009 6:47 pm
|
|
|
Member
Joined: 02 Feb 2007
Posts: 1734
Location: Central Missouri
|
|
Duhhhh !!!!!!! after looking at the # I get it now , Smiling .
Regards Charles |
|
|
|
|
|
|
|
| Posted:
Thu Feb 26, 2009 1:15 pm
|
|
|
Member
Joined: 28 Oct 2005
Posts: 665
Location: Louisiana
|
|
| Say Nick, as long as you're posting recipes what'cha got for the new wad using Red Dot and/or Green Dot? |
|
|
|
|
|
|
|
| Posted:
Thu Feb 26, 2009 8:25 pm
|
|
|
Member
Joined: 02 Feb 2007
Posts: 1734
Location: Central Missouri
|
|
What velocity are you looking for Ron ???
Regards Charles |
|
|
|
|
|
|
|
| Posted:
Mon Mar 02, 2009 2:23 pm
|
|
|
Member
Joined: 28 Oct 2005
Posts: 665
Location: Louisiana
|
|
Fast and faster................  |
|
|
|
|
|
|
|
| Posted:
Mon Mar 02, 2009 5:31 pm
|
|
|
Member
Joined: 02 Feb 2007
Posts: 1734
Location: Central Missouri
|
|
Hello Ron :
Untill I can get some more data on this wad , You should confine yourself to 18gr of GreenDot or less for the time being .
Regards Charles |
|
|
|
|
|
|
|
