Author |
Message |
< 16ga. Ammunition & Reloading ~ nitro 100 powder |
|
Posted:
Mon Mar 09, 2009 7:29 am
|
|
|
Member
Joined: 24 Dec 2005
Posts: 134
Location: Idaho
|
|
I have been trying to find a relative low pressure load for the 8# of nitro 100 powder that is in my shop. I found this load in some old accurate arms spread sheet. Fed. hull, 1 oz. of shot, fed 20A primer,BPSP 16ga wad. pressure, 7300 and the powder is 18.5 grains of nitro 100 powder. The pressure looks to be somewhat low compared to other loads that I have seen for this powder. What does the group think? Also the most important what is the BPSP 16 ga wad? Is there a new wad that replaces this wad? Thanks in advance, Larry |
|
|
|
|
|
|
|
Posted:
Mon Mar 09, 2009 9:22 am
|
|
|
Member
Joined: 11 Jan 2006
Posts: 179
Location: Hoosier state
|
|
The BP SP 16 wad would be Ballistic Products Sporting 16 wad.....the Gualandi wad known as the GU1621. I prefer ordering from Grafs...when they have 'em in stock.
I would be suspect of that data. Nitro 100 wouldn't be my choice for a low pressure load. Before I shot any, I would send some off to Tom Armbrust and get them tested.
Jeff |
|
|
|
|
|
|
|
Posted:
Mon Mar 09, 2009 12:24 pm
|
|
|
Member
Joined: 02 Oct 2007
Posts: 1975
|
|
Fed 16 Plas 1 oz. Nitro 100 14.5 Fed 209A WAA16 + 1-.135 1165 9,700 psi Accurate 1998
Fed 16 1 oz. Nitro 100 15.0 CCI 209 WAA16 + 1-.135 1165 8,900 psi Accurate 1998
Fed 16 Plas 1 oz. Nitro 100 15.0 Rem 209P SP-16 + ¼ 1165 8,700 psi Accurate 1998
Fed 16 Plas 1 oz. Nitro 100 15.0 WW 209 WAA16 + 1-.135 1165 9,800 psi Accurate 1998
Fed 16 Plas 1 oz. Nitro 100 15.5 CCI 209 WAA16 + 1-.135 1220 10,000 psi Accurate 1998
Fed 16 Plas 1 oz. Nitro 100 15.5 Rem 209P SP-16 + ¼ 1220 10,000 psi Accurate 1998
Fed 16 Plas 1 oz. Nitro 100 16.0 Fed 209A WAA16 + 1-.135 1220 10,900 psi Accurate 1998
Fed 16 Plas 1 oz. Nitro 100 16.5 WW 209 WAA16 + 1-.135 1220 10,200 psi Accurate 1998
Here's a few loads listed for Nitro100 |
|
|
|
|
|
|
|