Author |
Message |
< 16ga. Ammunition & Reloading ~ 16 ga Wadcutter |
|
Posted:
Thu Mar 12, 2009 10:03 am
|
|
|
Member
Joined: 01 Dec 2008
Posts: 605
Location: Topeka, Kansas
|
|
Anyone know a source on a 16ga wadcutter to cut over shot cards from card-stock? |
_________________ Michael
Topeka, KS |
|
|
|
|
|
|
Posted:
Thu Mar 12, 2009 10:14 am
|
|
|
Joined: 28 Jan 2007
Posts: 129
Location: hong kong
|
|
|
|
|
|
|
Posted:
Thu Mar 12, 2009 10:36 am
|
|
|
Member
Joined: 12 Mar 2005
Posts: 6535
Location: massachusetts
|
|
There are 25.4mm in 1 inch. Each one is .0394" 17mm is .670". which will give a good snug fit in most 16 ga barrels. 16.5mm punch will work well for solid wads to be used down inside the shell, but will not seal some barrels as well unless the wads obturate a bit upon firing. That depends on the material used to make the wad.
13mm to 14mm punch will cut .50 cal to 28 ga sized card wads for filling the 16 ga shot cup a bit. |
|
|
|
|
|
|
|
Posted:
Wed Mar 18, 2009 9:07 pm
|
|
|
Member
Joined: 01 Dec 2005
Posts: 1550
Location: Minnesota and Florida
|
|
|
Last edited by MaximumSmoke on Fri Sep 17, 2010 6:01 pm; edited 1 time in total |
|
|
|
|
|
|
Posted:
Thu Mar 19, 2009 3:37 am
|
|
|
Member
Joined: 06 Oct 2007
Posts: 2350
Location: West MI
|
|
While searching look up...arch punch...also. |
_________________ Sorry, I'm a Duck Hunter so shouldn't be held strictly responsible for my actions between Oct 1st and ice up. |
|
|
|
|
|
|