Author |
Message |
< 16ga. Ammunition & Reloading ~ Source of Data for 1 1/4 ounce load |
|
Posted:
Fri Mar 20, 2009 12:23 pm
|
|
|
Member
Joined: 01 Dec 2008
Posts: 605
Location: Topeka, Kansas
|
|
I am looking for a source of load data for 1 1/4 ounce load. The only data I could locate was for Winchester 571 powder. I have every kind of hull, wad on hand already, I just need reliable data.
Yes I know 1 1/4 ounce is a very heavy load for my 16, but I want the option for one particular use. |
_________________ Michael
Topeka, KS |
|
|
|
|
|
|
Posted:
Fri Mar 20, 2009 12:46 pm
|
|
|
Joined: 23 Jan 2008
Posts: 224
|
|
Alliant lists one 1 1/4 oz load on their website using a Federal Hull, Fed 209A primer, 30.5 grains of bluedot, and a remington SP-16 wad (1260 fps, 10,200 psi).
What is your intended use for a 1 1/4 oz load? |
|
|
|
|
|
|
|
Posted:
Fri Mar 20, 2009 4:59 pm
|
|
|
Member
Joined: 17 Aug 2008
Posts: 220
Location: Central Florida
|
|
Low Pressure Group has about 30 1 1/4 oz loads listed on the new spread sheet. |
|
|
|
|
|
|
|
Posted:
Fri Mar 20, 2009 5:28 pm
|
|
|
|
bowbuilder wrote: |
Alliant lists one 1 1/4 oz load on their website using a Federal Hull, Fed 209A primer, 30.5 grains of bluedot, and a remington SP-16 wad (1260 fps, 10,200 psi).
|
That ones going to leave a mark! |
|
|
|
|
|
|
|
Posted:
Sat Mar 21, 2009 4:32 am
|
|
|
Member
Joined: 06 Oct 2007
Posts: 2350
Location: West MI
|
|
[quote="old colonel"]I am looking for a source of load data for 1 1/4 ounce load. The only data I could locate was for Winchester 571 powder. I have every kind of hull, wad on hand already, I just need reliable data.
Yes I know 1 1/4 ounce is a very heavy load for my 16, but I want the option for one particular use.[/quote]
OC, the Lyman Shotshell Reloading Handbook, the Reloading For Shotgunners manual and BPI puts out; The 16 Gauge Manual. These are all good sources for more 1 1/4oz recipes. The LPG spreadsheet I looked at had 3-1 1/4oz recipes. Good luck, Mike |
_________________ Sorry, I'm a Duck Hunter so shouldn't be held strictly responsible for my actions between Oct 1st and ice up. |
|
|
|
|
|
|
Posted:
Sat Mar 21, 2009 6:54 am
|
|
|
Joined: 28 Mar 2008
Posts: 1460
Location: Eagle, Nebraska
|
|
I have several, can't say I have hunted with any. But can give you some "recipies" if you wish.
Most are with Blue Dot, 4756 or Longshot and I think I have one or two using Alliant Steel powder. (which I have used for 10ga, and for 16 but was using hevi-shot) |
|
|
|
|
|
|
|
Posted:
Mon Mar 23, 2009 6:20 am
|
|
|
Member
Joined: 01 Dec 2008
Posts: 605
Location: Topeka, Kansas
|
|
found what I needed, thank you all for the pointers |
_________________ Michael
Topeka, KS |
|
|
|
|
|
|
Posted:
Sat Mar 28, 2009 2:43 pm
|
|
|
Member
Joined: 15 Mar 2007
Posts: 601
Location: Virginia
|
|
Lyman's handbook lists several 1-1/4 oz loads. The one I use most is with the Federal hull, Remington SP16 wad, and Unique. It works.
Dan |
|
|
|
|
|
|
|